STM32F103RCT6 ARM STM32 Minimum System Development Board Module For Arduino Minimum System Board
STM32F103RCT6 ARM STM32 Minimum System Development Board Module For Arduino Minimum System Board
STM32F103RCT6 ARM STM32 Minimum System Development Board Module For Arduino Minimum System Board
STM32F103RCT6 ARM STM32 Minimum System Development Board Module For Arduino Minimum System Board
STM32F103RCT6 ARM STM32 Minimum System Development Board Module For Arduino Minimum System Board

STM32F103RCT6 ARM STM32 Minimum System Development Board Module For Arduino Minimum System Board

SKU: 1000191

Sunhokey

Regular price $5.70 Sale

Description:
 
1. Core: ARM 32-bit Cortex-M3 CPU up to 72MHz operating frequency.
2. Memory: 256K bytes of program memory(ROM); 48K bytes of SRAM;
3. Clock: Built-in factory-calibrated 8MHz and 40KHz RC oscillator with 32kHz RTC oscillator calibration;
4. Reset: power on/off reset (POR/PDR), programmable voltage monitor(RVD);
5. Power Management: 2.0-3.6V power supply and I/O pins;
6. Low power consumption: sleep, shutdown and standby mode, VBAT for the RTC and backup register power;
7. AD: Two 12-bit analog-to-digital converters, 1us conversion time(up to 21 input channels), conversion range:0 -3.6V, three times the sampling and hold function, the internal temperature sensor;
8. DMA: 7-channel DMA controller with supported peripherals: timer, ADC, SPI, I2C and USART;
9. Debug mode: serial single-wire debugging (SWD) and JTAG interface, Cortex-M3 embedded tracking module(ETM);
10. IO: 51 multi-function bidirectional I/O port, all I/O port can be mapped to 16 external interrupts; almost all ports can tolerate 5V signal;
11. Timers: three Universal timers and one Strengthen timer;
12. Up to two I2C interfaces(support SMbus/PMBus)
13. Up to three USART interfaces
14. Up to two SPI interfaces(18M bit/s), two can be reused
15. CAN interface (2.0B active)
16. USB 2.0 full-speed interface

Feature:
 
1. Matching chip for the STM32F103RCT6, F103 series for the relatively sufficient resources in the relevant chip, with 256K FLASH/ 48K SRAM
2. On-board 8M external crystal can be multiplied to 72M speed, on-board RTC crystal.
3. Power supply support USB data cable power supply
4. On-board standard JIAG interface, support a variety of simulation access, JLINK/STLINK access
5. IO all lead and the corresponding pin at the label, you can freely expand the circuit
6. On-board RTC button battery holder, the installation of the battery, can provide MCU-RTC power to maintain and backup

Datasheet